config
speed
speed
All
The speed parameter specifies whether the imaging head is either fast or slow.
The head will not be able to image fast if the dongle does not support fast
mode.
The dongle is a security device that is connected to a serial port on the back
of the MPE backplane. The dongle is programmed during integration and cannot be
changed in the field. The dongle's contents are read by the MPE firmware when
the machine is running.
integer
0
0 to 1
Currently, only the VLF Platesetter uses the dongle. There are no plans to
support the dongle on the Green 3244 Platesetters in the future.
cfg